Chemical Guys 16oz V34 Optical Grade Hybrid Compound- CHEM-GAP_V34_16

V34 Optical Grade Hybrid Compound is the mid-grade compound that eliminates light to moderate paint defects and imperfections from super hard paints, then finishes like a fine polish.

Mid-Level Cutting & Finishing Power For Tough Paint Defects

V34 cuts away light to moderate swirls, scratches, oxidation, and wet sand marks. V34 is blended with optical-grade micro abrasives that remove paint imperfections and defects, then finish with the clarity and precision that perfectionists demand. The diminishing micro abrasives work fast with true-cut accuracy there are no fillers, so the results you see are the true results you get.

Optical Grade Micro Abrasive Technology For Enhanced Clarity

V34 is the preferred cutting compound for lightly oxidized optical plastic and is the perfect one step polish to finish after wet-sanding faded and hazy headlights. The water-based formula is blended with advanced lubricants for extended work time. Use V34 with any dual action or rotary polisher to remove scratches and surface defects and restore luster and shine to any paint finish!

Features:

• Quickly remove 1500-2000 grit sanding marks
• Remove moderate swirls, scratches, oxidation, and paint defects
• Get the perfect base for next steps
• Restore your headlights for safest night driving
• Minimize dusting for the best polishing experience

• Applicable Materials: Painted Surfaces
• Car Finishes: Gloss

1. Shake well and apply 4-5 drops to desired pad.
2. Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
3. Turn on machine on paint to speed setting 1 to spread product.
4. Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
5. Follow with light pressure to finish.
6. Remove residue with a clean microfiber towel.

1. Shake well and apply 4-5 drops to desired pad.
2. Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
3. Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product.
4. Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
5. For final pass adjust speed setting to between 1200-1800 rpms.
6. Work until optical clarity is achieved.
7. Remove residue with clean microfiber cloth.

• Always try a test spot before use.